OIL FOR LONG-TERM
PROTECTION AGAINST CORROSION
CREATES A FILM, DOES NOT DRY, THIN FILM CAN BE REMOVED BY ALL NORMAL SOLVENTS
NEUTRALISES CORROSION GENERATED BY FINGER MARKS
PROTECT FL 100, PENETRATING, FOR COMPLEX SHAPE PIECES
PROTECT FL 100 BLUE, COLOURED BLUE, VISIBLE WHEN APPLIED
FOR PLANE FORMAT PIECES
NON-PENETRATING, NO STAINS WHEN RECOMMISSIONED
PROTECTION OF MOULDS, PRESS TOOLS BEFORE STORAGE, CUTTING TOOLS
DESCRIPTION
PROTECT FL 100
Clean, colorless, not fat, this product is guaranteed free from silicone and ortho-phosphoric acid. It does not contain chlorinated solvents.
It protects effectively from corrosion and leaves a no fatty, non siccative film. Eliminates light or heavy hydrocarbons, avoids flashing, does not resinify.
Stable product with a remarkable surface tension.
Completely colorless, it improves working conditions. No photochemical reactivity.
Does not irritate.
Water repellent, usable on wet surfaces. Low vapor pressure, at maximal temperature use.
Compatible with all plastic materials and elastomers, does not damage paintings.
Recommended after metal forming with soluble oils.
Avoids spot problems due to the acidity of hands.
PROTECT FL 100 BLUE
Anti-corrosion fluid, grease-free, very weak odour
Stable, does not react to UV, does not desiccate.
Blue colour so that treated surfaces are visible.
Fluid formulation with very low surface tension for effective use on parts with complex geometry.
APPLICATIONS
|
Parts carried out by reproducing machines. Precision parts. Prototypes. Molds. Tools, stamping tools. Bolt and screw manufacture, penstock, pins. Machine tools slideways ungumming Pivots, axes. Push-pull cables. Electromechanical contacts. |
Hinges, guides. Columns, slideways. Telescopic antennas. Car body. Frames. General maintenance. Protection of molds in foundry, glassmaking, plastic injection. Use in the Navy. |
PHYSICO-CHEMICAL PROPERTIES TYPICALS
|
PROPERTIES |
STANDARD or METHOD |
VALUES FL 100 |
VALUES FL 100 BLUE |
UNITS |
|
Appearance |
Visual |
Fluid |
Fluid |
- |
|
Colour |
NF M 07.003 ASTM D 156 |
Beige |
Blue |
- |
|
Smell |
Olfactory |
light |
No smell |
- |
|
Density at 20°C |
ISO 12.155 |
810 |
778 |
g/l |
|
Utilisation temperature range |
- |
-10°C+100°C |
-10°C+100°C |
- |
|
Surface tension at 20°C |
ISO 6297 |
21.9 |
29.6 |
dyne/cm |
|
ACTIVE SUBSTANCE PROPERTIES |
||||
|
PROPERTIES |
STANDARD or METHOD |
VALUES FL 100 |
VALUES FL 100 BLUE |
UNITS |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
55 |
120 |
mm²/sec |
|
Self-combustion point |
ASTM E 659 |
>200 |
>200 |
°C |
|
Acid index la |
ISO 6618 |
0.0 |
0.0 |
mg/(KOH)/l |
|
Sulphated ash content |
NFT 60,144 |
0.0 |
0.0 |
% |
|
Impurities content larger than 5 µm |
FTMS 791 3005 |
0 |
0 |
number/ml |
|
Elastomer compatibility Dimensional variation 168 h at 40°C |
FTM 791 |
<0.5 |
<0.1 |
% |
|
Environmental properties Octanol/Water bio accumulation sharing index accumulation sharing index |
OECD 107 |
<3 |
<3 |
log kOW |
|
Danger category for water |
WGK |
Category 1 no danger for water |
Category 1 no danger for water |
category |
|
Wet film thickness |
Depth gauge |
150 |
300 |
µm |
|
Salt spray test |
ISO 9227 ISO 4623-3 |
190 RI5 |
200 |
h - |
APPLICATION METHOD
Shake the can.
Spray on clean surfaces, at room temperature to about 25 cm surface to be treated.
Aerosol used in all positions.
PRESENTATIONS
Aerosol 650 ml
|
|
|
|
"Guaranteed without HFC greenhouse effect"
|
Looking for another product?
|
Discover our entire range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 